Robots, hands and parts. Request a US delivery quote for your work. Configuration, pricing, availability and lawful supply are confirmed for your destination.
Availability depends on the robot model, configuration and delivery destination, and is subject to applicable FCC requirements, import rules and other legal restrictions. After your inquiry, Elite Event Robotics will follow up to confirm whether we can lawfully supply your selected robot. Availability and delivery are not guaranteed.
Explore platforms and parts. Configuration, supply options and pricing are confirmed by quote.
Showing 24 of 137 products
Develop mobile manipulation around dual articulated arms and a steerable base. Confirm end effectors and teleoperation options for your setup.
Plan a performance and interaction project with the supplier's base A3 offering. Confirm the Standard SKU and shown hand configuration.
Evaluate service and interaction around the separately documented A3 Ultra platform. Qualify perception, charging and site setup for the supplied unit.
Give performance and interaction projects a compact humanoid starting point. Neo's comparison does not support an SDK development path.
Build a guidance or development brief around X2 Ultra's documented SDK support. Confirm the revision and validate navigation for the site.
Focus motion-control development on the educational X2 platform. EDU's SDK scope and media remain separate from Neo and Ultra.
Choose a compact legged platform with clear development boundaries. Pro does not support secondary development or expansion interfaces.
Connect research work to a legged quadruped with documented SDK access and expansion interfaces. Confirm any additional modules.
Explore legged development with a manufacturer-listed SDK and target tracking. Following still requires secondary development.
Compare a wheel-equipped quadruped against the legged Ultra configuration. Review mode, load and test conditions for your intended terrain.
Plan wheel-leg development around SDK access and dual batteries with hot swap. Confirm the supplied compute, modules and dock options.
Scope heavier-payload work using a legged platform with explicit delivered software limits. Match payload and terrain to the datasheet conditions.
Evaluate tendon-driven manipulation using the manufacturer's named Ultra-T launch reference. Confirm sensing, handedness and mounting before integration.
Develop a training or teleoperation brief around the direct-drive Ultra-M hand. Verify the supplied tactile and mounting configuration.
Start a hand-integration review from a dedicated supplier product view. Resolve the OmniHand generation before comparing numeric specifications.
Separate the supplier's tactile hand from other OmniHand configurations in your inquiry. Confirm the revision and sensor package before specifying it.
Clarify a Lite-S hand request using the supplier's dedicated reference. Establish the exact suffix before applying related Lite specifications.
Identify the Titan Picker in your quote request using its supplier folder and product view. Technical identity and parameters still need confirmation.
Review Swift Picker from the manufacturer's named G2 data-collection reference. Confirm parameters and the supplied adapter for your own setup.
Scope an adaptive-gripping setup with the original OmniPicker manual as the reference. Check the supplied revision, mounting and communication mode.
Plan an A3 battery inquiry around the exact replacement pack you need. Confirm the SKU, pack count and per-pack ratings rather than using robot-system energy.
Resolve X2 Ultra replacement-battery requirements against the supplied robot revision. Verify the pack and connector before comparing energy ratings.
Specify which X2 Ultra skin-set reference you are requesting using the supplier image. Confirm material, coverage and attachment before assessing fit.
Request a human review of this model and your destination. Configuration, lawful supply and availability are not confirmed.
2 configuration choices
24 of 137 matching products
Source reference values retain their published units and configuration context. Final hardware, inclusions, availability and terms are confirmed by quote.Source references only. Configuration, inclusions and availability confirmed by quote.
| Feature | AGIBOT A3 Standard | AGIBOT X2 Ultra | AGIBOT G2 |
|---|---|---|---|
| Model & reference image |  |  |  |
| Key differences | |||
| Reading these references | Up to three differing facts. Values from different sources, variants, units or conditions are not equivalent measurements or rankings. See configuration conditions and full source context below. | ||
| Dimensions (H × W × L) | 173 × 52 × 30 cm (base A3 manual)AGIBOT A3 Standard — manufacturer reference; supplied configuration confirmed by quoteSource ↗ Release: 2026-05-08 13:41:53 | 1310 × 460 × 210 mm (AimDK_X2 1.1.0)AGIBOT X2 Ultra — manufacturer reference; supplied configuration confirmed by quoteSource ↗ AimDK_X2 1.1.0 | Not published for this configuration. |
| Compute | RK3588 ×2AGIBOT A3 Standard — manufacturer reference; supplied configuration confirmed by quoteSource ↗ Release: 2026-05-08 13:41:53 | Not published for this configuration. | Not published for this configuration. |
| System energy / endurance | 1152 Wh; 10 hours measured at standing:walking 1:1AGIBOT A3 Standard — manufacturer reference; supplied configuration confirmed by quoteSource ↗ Release: 2026-05-08 13:41:53 | Not published for this configuration. | 1652 Wh across two batteries; approximately 4 hoursAGIBOT G2 — manufacturer reference; supplied configuration confirmed by quoteSource ↗ Release: 2026-07-30 18:04:49 |
| Use & configuration | |||
| Published data | Not published for these configurations. | ||
| Size & mechanics | |||
| Dimensions (H × W × L) | 173 × 52 × 30 cm (base A3 manual)AGIBOT A3 Standard — manufacturer reference; supplied configuration confirmed by quoteSource ↗ Release: 2026-05-08 13:41:53 | 1310 × 460 × 210 mm (AimDK_X2 1.1.0)AGIBOT X2 Ultra — manufacturer reference; supplied configuration confirmed by quoteSource ↗ AimDK_X2 1.1.0 | Not published for this configuration. |
| Mass | 55 kg (base A3)AGIBOT A3 Standard — manufacturer reference; supplied configuration confirmed by quoteSource ↗ Release: 2026-05-08 13:41:53 | Approximately 39 kg (Ultra revisions)AGIBOT X2 Ultra — manufacturer reference; supplied configuration confirmed by quoteSource ↗ AimDK_X2 1.1.0 | 185 kgAGIBOT G2 — manufacturer reference; supplied configuration confirmed by quoteSource ↗ Release: 2026-07-30 18:04:49 |
| Active body degrees of freedom | 31 excluding handsAGIBOT A3 Standard — manufacturer reference; supplied configuration confirmed by quoteSource ↗ Release: 2026-05-08 13:41:53 | 31 in new version; 30 in older UltraAGIBOT X2 Ultra — manufacturer reference; supplied configuration confirmed by quoteSource ↗ AimDK_X2 1.1.0 | Not published for this configuration. |
| Arm payload | 5 kg per armAGIBOT A3 Standard — manufacturer reference; supplied configuration confirmed by quoteSource ↗ Release: 2026-05-08 13:41:53 | 3 kg in specified postures; ≤1 kg across full workspace, excluding end effectorAGIBOT X2 Ultra — manufacturer reference; supplied configuration confirmed by quoteSource ↗ AimDK_X2 1.1.0 | Not published for this configuration. |
| Walking speed | Not published for this configuration. | Maximum 1.8 m/s; daily ≤0.8 m/s (documentation)AGIBOT X2 Ultra — manufacturer reference; supplied configuration confirmed by quoteSource ↗ AimDK_X2 1.1.0 | Not published for this configuration. |
| Dimensions (L × W × H) | Not published for this configuration. | Not published for this configuration. | 760 × 640 × 1225–1795 mmAGIBOT G2 — manufacturer reference; supplied configuration confirmed by quoteSource ↗ Release: 2026-07-30 18:04:49 |
| Body degrees of freedom | Not published for this configuration. | Not published for this configuration. | 25 excluding end effectors (G2 user manual)AGIBOT G2 — manufacturer reference; supplied configuration confirmed by quoteSource ↗ Release: 2026-07-30 18:04:49 |
| Rated arm payload | Not published for this configuration. | Not published for this configuration. | 5 kg per arm; 10 kg dual-arm ratedAGIBOT G2 — manufacturer reference; supplied configuration confirmed by quoteSource ↗ Release: 2026-07-30 18:04:49 |
| Compute & SDK | |||
| Compute | RK3588 ×2AGIBOT A3 Standard — manufacturer reference; supplied configuration confirmed by quoteSource ↗ Release: 2026-05-08 13:41:53 | Not published for this configuration. | Not published for this configuration. |
| Development compute | Not published for this configuration. | Orin NX 16 GB; 157 TOPS (documentation rating)AGIBOT X2 Ultra — manufacturer reference; supplied configuration confirmed by quoteSource ↗ AimDK_X2 1.1.0 | Not published for this configuration. |
| Standard compute | Not published for this configuration. | Not published for this configuration. | 500 TOPS INT8 (standard configuration)AGIBOT G2 — manufacturer reference; supplied configuration confirmed by quoteSource ↗ Release: 2026-07-30 18:04:49 |
| Power & operating conditions | |||
| System energy / endurance | 1152 Wh; 10 hours measured at standing:walking 1:1AGIBOT A3 Standard — manufacturer reference; supplied configuration confirmed by quoteSource ↗ Release: 2026-05-08 13:41:53 | Not published for this configuration. | 1652 Wh across two batteries; approximately 4 hoursAGIBOT G2 — manufacturer reference; supplied configuration confirmed by quoteSource ↗ Release: 2026-07-30 18:04:49 |
| Endurance | Not published for this configuration. | About 2 hours of continuous walking at 0.5 m/sAGIBOT X2 Ultra — manufacturer reference; supplied configuration confirmed by quoteSource ↗ AimDK_X2 1.1.0 | Not published for this configuration. |
| Included & optional | |||
| Published data | Not published for these configurations. | ||
| Sources & notes | |||
| Configuration conditions | Standard is the supplier label for base AGIBOT A3; exact SKU mapping is pending. The manual's 31–57 DOF family range includes hand configurations, not a universal base count. Normal daily walking <1.2 m/s, maximum daily 1.8 m/s, laboratory 2.5 m/s and running 5 m/s are separate modes. The 24-hour operation statement requires battery replenishment. Standard/Ultra share reference imagery; hands and demonstrated features may differ. | AimDK_X2 1.1.0 lists approximately 421 Wh/1.8 m/s versus store approximately 500 Wh/laboratory 2 m/s; supplied revision remains pending. New documentation revision has UWB, two neck DOF and USB-C ×3 with no Type-A; older Ultra has one neck DOF, no UWB, A×2/C×2. Store New Version still lists A×2/C×2. Automatic charging is optional. Shared Neo/Ultra media does not establish installed hands or autonomous tours. | The brochure lists 26 body DOF versus 25 in the manual. Standard compute is 500 TOPS INT8; high-compute is 2070 TFLOPS FP4, a different precision and unit. Manual slope guidance says ≤5% while its table says ≤5°; approved slope remains pending. Hands, dock, compute revision, kits and licenses need confirmation. End effectors are optional and not hot-swappable; continuous operation requires replenishment. |
| Documentation | Full specifications & source context ↗Manufacturer reference tables & gaps ↗Source documents (3)AGIBOT A3 Series User Manual ↗Release: 2026-05-08 13:41:53 AGIBOT A3 — Silicon-based star born for the stage ↗Revision not published Catalog source ↗Revision not published | Full specifications & source context ↗Manufacturer reference tables & gaps ↗Source documents (3)1.2 Robot Specifications — AimDK_X2 1.1.0 documentation ↗AimDK_X2 1.1.0 AGIBOT X2 Ultra — Humanoid Robot for Guidance & Development ↗Revision not published Catalog source ↗Revision not published | Full specifications & source context ↗Manufacturer reference tables & gaps ↗Source documents (3)AGIBOT G2 User Manual ↗Release: 2026-07-30 18:04:49 AGIBOT Product Brochure-20260722 ↗AGIBOT-Product-Brochure-20260722.pdf Catalog source ↗Revision not published |
Planning a launch, expo or activation? Discuss an event experience alongside your purchase. Models and availability are confirmed separately.
Book it for your eventAsk about configuration, setup, training, integration or repair. Scope and provider availability are confirmed separately.
Explore service requestsShare your requirements. We’ll confirm configuration, availability, delivery and pricing. This form starts an inquiry and does not collect payment.
Configuration and pricing are confirmed directly in your quote.
